Aluminum Alloy Impeller Mining Axial Flow Fan Ventilation and Smoke Exhaust

• Material: Carbon Steel,Iron,Stainless Steel
• Usage: for Experiment, for Air Conditioner, for Manufacture, for Refrigerate
• Flow Direction: Axial Flow
• Pressure: High Pressure
• Certification: ISO, CE, CCC, BV
• Speed: 1450 R/Min
• Model NO.: HRMF
• Air Flow: 1580-930m3/Min
• Total Pressure: 850-6410 PA
• Power: 2X75 Kw
• Color: Red/White/Grey/Yellow/Blue/Customized
• Transport Package: Wooden Case
• Specification: According to the order
• Trademark: HURRIC
• Origin: Shandong, China
• HS Code: 8414599000
• Production Capacity: 5000pieces/Year

Product Description

SDF forced in counter rotating axial flow tunnel fan is a new product developed by Hurric Industrial Equipment (Shandong) Co., Ltd on the basis of summarizing the structure and technical performance of domestic existing forced in tunnel fan. The product has the characteristics of reasonable structure, complete specifications, high efficiency, low noise and long air supply distance, which greatly reduces the labor intensity of workers and saves ventilation time. It is an ideal equipment for tunnel ventilation. It can also be used in ventilation systems of metallurgy, chemical industry, mining industry and so on.

Main purpose and scope of application

This product is mainly used in tunnel ventilation systems such as highways, subways and mines for press in ventilation. It is suitable for press in local ventilation of various mining faces and chambers.

Structural features

The fan is composed of five parts: current collector, air inlet silencer, primary group, secondary group and air outlet silencer. Each stage is driven by a motor with the same rated power. The impeller is directly connected to the motor shaft, and the rotation direction of the impeller between the two adjacent stages is opposite. After the gas enters the first stage impeller to obtain energy, it is accelerated and discharged through the second stage impeller. The latter stage impeller has the function of stationary blade of axial flow fan and increases the gas flow at the same time, so as to achieve higher wind pressure and efficiency.The fan can be disassembled from the middle flange and used in a single section, but pay attention to safety to prevent damage to the impeller caused by foreign matter inhalation.

Operating environment

This product can be used on the ground of tunnel or support.Use on the bracket. Ambient gas temperature of fan.It is 15 to 50 degrees, and the altitude shall not exceed 1000 meters,The rated frequency of the power supply used is 50Hz.

Working conditions

The dust content of the product passing through the gas shall not exceed 200mg / m3.
Debugging procedures, methods and matters needing attention
Open the motor junction box, select the suitable cable according to the motor power, thread the wire from the junction box of the first and second class chassis, connect the motor through the junction box, fix the junction box and tighten the nut. Check whether the bolts are complete and reliable, check the completion of the commissioning can be carried out and commissioning. If need to connect the frequency conversion control cabinet, each frequency conversion control cabinet is connected with a junction box separately, to ensure the rotation direction of the impeller is consistent with the direction of the Arrow marked by the fan.

Installation and commission

The Fan does not need a special equipment foundation, placed on a relatively flat ground or plane can be long-term stable operation, if the use of hanging installation, the fan top lifting ears should be good bolt, use The u-shaped crane steel link can be good.




IN BRIEF
The SDF Series of Axial Fans have been a staple of the mining industry for the past 20 years. Designed specifically for demanding underground conditions the SDF has been used in mechanised mines worldwide. Available as single, twin or triple stage configurations with flow rates up to 57m3/s and pressures up to 2.7kPa per stage.The SDF uses fixed pitch vacuum cast impellers for increased efficiency and longevity.

Products photo

Product details

Model NO.	SDF-11
Air flow	1580-930m3/min
Working Pressure	850-6410 pa
Motor power	2x75 KW
Voltage	380V/440V/220V/600V
Color	Red/White/Grey/yellow/blue/Customized
Package	Wooden Case

Notes:

Before place an order, please send us following parameters to help us find the most suitable fan&blower for you:
1	Air Flow/Volume/Capacity:
2	Pressure:
3	Power:
4	Voltage:
5	Frequency:
7	Altitude of Operation Place:

Parameters of several basic fans
 

MODEL	POWER(KW)	SPEED(RPM)	Air outlet diameter(mm)	AIR FLOW(m³/min)	PROSSURE(PA)
HR-SDF-4	2X4	2900	400	165-110	375-3040
HR-SDF-5	2X7.5	2900	500	260-170	400-3155
HR-SDF-5.6	2X11	2900	550	350-190	310-3640
HR-SDF-6	2X15	2900	550	390-270	380-4480
HR-SDF-6.3	2X30	29600	600	510-310	640-7310
HR-SDF-7	2X45	2900	700	690-410	680-8160
HR-SDF-8	2X55	2900	800	870-500	690-8230
HR-SDF-9	2X75	2900	800	970-560	850-9900
HR-SDF-10	2X45	1450	1000	890-520	450-5720
HR-SDF-10.5	2X55	1450	1100	1170-670	510-3100
HR-SDF-11	2X75	1450	1200	1580-930	850-6410
HR-SDF-12	2X90	1450	1500	1640-990	990-6640
HR-SDF-13	2X110	1450	1500	1770-1040	1260-6850
HR-SDF-14	2X132	1450	1600	1920-1270	1330-7200
HR-SDF-15	2X160	980	1800	2050-1330	1640-5870
HR-SDF-16	2X185	980	2000	2270-1650	1800-6590

FAQ



Q. What's the information should I provide when inquiry?
A: Flow rate&Air Volume
B: Pressure
C: Purpose
D: Use environment(Temperature, atmospheric pressure)
Or other specials you give us will be more appreciated.

Q. What is your warranty?
A.Our warranty is 12 months after received the centrifugal fans. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure
continuous safe and high-quality equipment operation.

Q. How does your factory control product quality?
A.We have quality inspection department. All blowers are running more than 3 hour before delivery to test the quality. If there is quality problem, we will produce new one.

Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.

Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high pressure blower, explosion proof fan, etc, welcome to contact us to learn more details.

Q. Where is your factory? Can i visit your factory?
A. Our factory is located in Zibo, Shandong, welcome to visit our factory.

Q. How long will it take to ship after order?
A. 20~30 days for one container.